Tuesday, June 12, 2012

D.I.Y: Fringe Necklace


Before you begin this project make sure you have enough chain (I used up the majority of this pack which is about 100 inches.)

1. Measure and cut a 16 inch strand of chain. Attach a lobster claw clasp and a hoop at the ends.



2. Cut as many 3 inch strands of chain as you can. Group the strands into pairs.



3. Fold the necklace in half and mark the middle. Attach the first strand. In my case, I made the center strand a bit longer that the rest (about 4 inches instead of 3).



4. Continue attaching strands on both sides until you're happy with the results.




Here's the final look:


4 comments:

  1. Just shared this on my blog with a link back!
    http://handmadenest.blogspot.com/2012/06/diy-project-summer-necklace-bracelets.html

    ReplyDelete

Related Posts Plugin for WordPress, Blogger...